light help

[tecnico]

Hi
i've a problem with area light
when i assign the vraylight tag don't go
there in no light in the scene
i can't understand it

[Cristian Tumiati]

should you post the scene?

[nycL45]

The three suggestions posted here for similar problems:
1. Make sure scene scale and light intensity go together. I like to work at full scale or 1:1 for this reason.
2. Turn up the intensity of your light(s) - way up! More!
3. Check your camera and settings (speed, ISO and aperture or f-stop) - Settings for starters, if interior, try 1/30 sec. + 200 ISO + f2.8. If exterior, try 1/125sec + 100 ISO + f8. Should there be some light, adjust these settings until you have your scene the way you like it.

[Stain777]

Unfortunately the area light is a little wonky yet. I'm using 1"=1" scale and the area lights just don't work until you turn them up to 100,000 or higher! It's been reported as a bug and hasn't been fixed in 1.02 or 3 yet.

[DanieleF]

Hi guys,
again an example scene would be of great help.

Cheers
Daniele