vray bridge 64 bit e osx crash [see inside for help]

[garbage75]

Hi,

after some time I try to use vray bridge 64 bit under c4d 64 bit with memory system of 8 giga... so 64 bit vrady bridge does not work.. every time I lunch a render or a preview, or even a batch render, cinema crash, tell me that vraylib...etc..etc.. cause an error... what I have to do?
I have very large file to render... and I cannot under 32 bit..
I have always used vray bridge at 32 bit, with cinema at 32 bit... but now I need the 64 bit... I also try to re install vray bridge... supposing that need to understand that c4d runs at 64 bit.. but nothing... when I try to render c4d crash! I work under OSX with a macpro 8 cores.
I hope to hear for you as soon as possibile
best regards
Walter

I upload a zip file contaning the print screen error and the txt of the bugreport


http://digilander.libero.it/walterfog/bridge_error.zip

[stefan]

vray works 100% on osx64.

you kight have not enabled cineam4d to run in 64 bit mode?(press apple -I and activate 64bit mode)
per default cinema starts in 32bit.
also make sure theintsallation is ok and the whole maxon folder and its subfolders have full read and write permission

i also answered your email,
more install help per mail.

cheers
stefan

[garbage75]

Hi Stefan

I saw your email answer.... Cinema run at 64 bit... any other try return no good news.... other italian users have the same problem.. with the same no answer!!
Hope could help us
best
Walter

[stefan]

i think i gave good answer, as this is the only points why it couldn't run,
otherwise it 100% does. i see this from the huge amount of users who run it fine on same hardware and os.

no, no single user has this problem or could not easy solve it (at least no official user had that).
if you see one official user who does have an install problem tell him to contact me. we could always help until now:-)

vray runs 100% on osx and 64bit for sure.

i have no single report of one who could not solve it in installing ok.
(i assume official users would contact me if they have problems)
if one has a start problem, its all time permissions or bad install and was solvable easy.

make sure you have the right installer, and that your permissions are ok. then it runs

if you have that ok it 100% runs:
>> full read and write permission of the maxon+subfolders
>> osx 10.5
>> latestest vray installers (redownload them to make sure from here)
>> proper cinema4d 11 install of course
>> macintel
>> 64 bit mode enables in c4d.

do a fresh install and verify all points i said.

you can also use the manual install method here in the forum under "here are the links to latest files and updates"make sure you have the latest installers

i personally have it running on several mac pros here on 64bit as well as many many other hundreds of osx users.

please email me for more help.
if you have a problem with a specific file email it to me.
old 1.08x files might some things to adapt to run in 1.1

cheers
Stefan